Flexible Rubber Reducer Coupling Adaptor Pipe Connector Fish Pond or Plumbing

Here at Future Build Supplies we are supplying from the original inventor of the Flexible Coupling, with over 50 years experience in the manufacturing of this product, 

The original Coupling is second to none and the quality is excellent for doing job and forgetting it!

PLEASE NOTE ALL SIZES LISTED IN THE DROP DOWN MENU ARE THE INTERNAL DIAMETERS OF COUPLING / BEND / TEE !!

Internal Underground Drainage Reducer for 160mm x 110mm

Adaptor couplings

are designed to provide a solution to most requirements for adaptation between pipes of different sizes and materials up to DN 300. The range covers both traditional and new pipe materials an important factor with the increased development of brownfield sites.

 The couplings consist of a stepped moulded sleeve with different diameters at each end, which is sealed on the pipes by two clamping bands.

 Uses:

 Connecting pipes of different outside diameters and/or materials without the use of a bush

Connecting laterals to sewers or drains

Connecting pipes to prefabricated structures e.g. manholes, inspection chambers, septic tanks

Drain Couplings

are designed for use in drainage systems, where the resistance to earth loads and shear forces provided by a shear band is not required. They are available to joint drainage pipes up to 225 mm diameter.

Due to the use of modern fabrication methods any coupling can be supplied to site within 24 hours.

Uses:

As a joint for plain ended pipe

The repair of an existing drain by the insertion of a new length of pipe

As an adaptor between pipes of different materials

Jointing short or cut lengths of pipe

Provision of rocker pipes adjacent to structures

Hi Strength Standard Couplings

are primarily designed for jointing pipes in sewerage, drainage and other non-pressure applications and comply with the requirements of Water Industry Specification WIS 4-41-01 „Specification for flexible couplings for gravity sewerage and drainage pipes“.

Due to their robust design they have the ability to provide a reliable seal on any pipe material whether rough e.g. concrete or smooth e.g. PVCu. Whilst the centre shear band provides resistance against heavy earth loads and shear forces, helping to ensure pipe alignment with joint flexibility.

The unique design of the Mission Standard Couplings offers the end user the following benefits:

The thickness of the rubber sleeve allows for greater flexibility and the ability to withstand an internal water pressure of 2.5 bar on pipes such as ductile iron and plastic.

The new “locked-in-place” profile of the rubber sleeve ensures that both end clamps and shear band remain securely in place during transportation to the job site.

The elimination of spot-welds on the shear band and their replacement with fasteners using TOX ® technology enhances the corrosion resistance of the couplings. Uses

As a joint for plain ended pipe.

Where a post connection is required to an existing drain or sewer.

The repair of existing pipelines by the insertion of a new length of pipe.

As an adaptor between pipes of different diameter or materials. (Where the difference in diameter exceeds 12mm a bush should be used if an Adaptor Coupling is not available).

Jointing short or cut lengths of pipe.

Provision of rocker pipes adjacent to structures.

Tees and Elbows

connect to new and traditional plumbing pipes without the need for special tools thereby making them ideal for emergency replacements or repair. They are manufactured synthetic rubber with 300 series corrosion resistant stainless steel end clamps.

 Their design makes them especially suitable for use in confined areas.

 Uses:

 Emergency repairs to existing pipework without the need for special tools.

New connections to existing pipework.

Replacement of existing tees or elbows when cut out for replacement or repair.

End Caps MEC

 End Caps with their robust design in synthetic rubber can be used both for temporary or permanent sealing of pipe ends. End clamps are manufactured from 300 series corrosion resistant stainless steel.

 Uses:

 Temporary protective cap to prevent ingress of dirt or water.

Permanent clean-out cap.

Air testing of soil or waste systems.

The Mission-GENIUS joints all pipes within one dimension in the size range stated above and will resist an internal water pressure of 2.5 bar. The Mission-GENIUS has been designed to the profile of the Mission Standard Coupling and comes with two integrated bushes that can be folded out and removed on one or both sides depending on the application. The right solution always to hand: What ever pipe material needs to be jointed within one dimension (DN), the Mission-GENIUS will always be the right flexible coupling for the contractor. The connection can be made immediately and the site work can continue without delay.

Push-In Adaptor – for the internal connection of pipe systems with different dimensions and materials

The Single Pipe Connector joints pipe systems with different dimensions

and materials and can be used for flush-mounting and non-

buried pipe connections.

INSTALLATION

The Push-In Adaptor is made from a durable EPDM rubber and has a noise reducing impact on downpipes.

MULTI PIPE CONNECTORS

Multi Pipe Connector – for the internal connection of pipe systems with different dimensions and materials

The Multi Pipe Connector joints pipe systems with different dimensions

and materials and can be used for flush-mounting and non-buried

pipe connections. Multi Pipe Connectors can be combined with other Multi Pipe Connectors.

The Multi Pipe Connector is made from a durable EPDM rubber and has a noise reducing impact on downpipes.

Please take a moment  to check out my Ebay Shop and see what other Fantastic deals you could benefit from!